Difference between revisions of "Advanced Topic 13 Continued II"

Revision as of 17:58, 20 October 2016

Command line option

The serial tilter functionality is turned on/off via a command line option of the MiniSim visual server, shown below. To turn on the tilter, add the option "-tilter port_no" in the NadsMiniSimVisualServer.bat file under the bin folder, where port_no is the serial port number on the MiniSim computer that the tilter is connected to via the serial port adapter. For example, if the serial port is named COM4, then the port number is 4.

The NadsMiniSimVisualServer_nves.bat folder showing the –titler option (line 2). Note the first and third lines are not being used, as they are commented out using the ‘rem’ at the beginning.