Difference between revisions of "Motion Base Option"
| Line 7: | Line 7: | ||
</html> | </html> | ||
| − | + | The system has the following specifications: | |
<ul><li>3 degrees of freedom: Heave, roll, pitch</li> | <ul><li>3 degrees of freedom: Heave, roll, pitch</li> | ||
<li>Small, compact vertical actuators:</li> | <li>Small, compact vertical actuators:</li> | ||
| Line 21: | Line 21: | ||
<li>Emergency Stop buttons within reach of the driver and operator</li> | <li>Emergency Stop buttons within reach of the driver and operator</li> | ||
<li>Easily added to existing systems; the cab’s height and relationship to monitors is not affected.</li></ul> | <li>Easily added to existing systems; the cab’s height and relationship to monitors is not affected.</li></ul> | ||
| + | |||
| + | [[File:2021_02_22-NADS MiniSim jatorner -0106.jpeg|400px]] | ||
Revision as of 16:44, 17 May 2022
New or existing miniSims can be equipped with a compact low-cost motion system from D-Box Technologies [1].
Compact, durable actuators installed on the cab frame provide motion cues to the operator in three degrees of freedom (heave, roll, pitch), as well as vibration cues that change in response to road surface type (gravel, concrete, asphalt), vehicle speed, and engine RPM. These cues combine to create a more immersive driving experience for the vehicle operator, and enhance control of the vehicle.
The system has the following specifications:
- 3 degrees of freedom: Heave, roll, pitch
- Small, compact vertical actuators:
- Three actuators for Simplified Cab systems
- Four actuators for Quarter Cab systems
- Actuator specifications:
- Capacity: 250 lb [112 kg] each
- Stroke: 1.5 inch [38 mm]
- Power: 120 VAC, 60 Hz, 3.5 A (3 actuators) 5.0 A (4 actuators)
- Road surface types: gravel, concrete, asphalt
- Engine vibration
- Tuning menu with save/recall of motion parameters
- Emergency Stop buttons within reach of the driver and operator
- Easily added to existing systems; the cab’s height and relationship to monitors is not affected.
